Home
>
products
>
Waterproof Silicone Sealant
>
|
|
| Place of Origin | Guangdong,China |
| Brand Name | PLYFIT |
| Certification | REACH,SGS |
| Model Number | HY-3300 |
PLYFIT HY 3300 Curtain wall Neutral Silicone sealant is a high modulus one-component, shelf-stable, neutral room temperature curing, architectural grade sealant, that exhibiting outstanding physical properties for project and general building construction.
It’s exhibiting features as follow:
1. 100% silicone;
2. Low VOC;
3. Durable flexible;
4. Water resistant, UV resistance and weather resistant;
5. Match a variety of substrates;
6. Keep good performance between-50℃～+150℃ after curing.
| 1. | Sealing joint for glass/marble/aluminum curtain wall and other architectural project. |
| 2. | Excellent adhesive to aluminum, glass, stainless steel, wood, ceramic, porcelain, rooting, fiberglass composite, enamel, and wallboard. |
Not recommended for
| 1. |
Masonry or cement, aquariums & metals like zinc, brass, copper, lead metal; |
| 2. |
Architectural joints, joints subject to heavy abrasion or wear or tuck pointing; |
| 3. | Total water immersion, frosty or moist surface |
| 4. | Unsuitable for application when the surface temperature is lower 4℃ (40℉) or over 40℃ (110℉); |
Coverage:
A 300ml (10oz) cartridge will extrude approx. 9.5m (31 ft) of a 6mm (1/4”) bead.
Storage and Transportation:
Not damaged by freezing. Store in temperature above 4℃ (40℉) and below 40℃ (110℉). Allow any unwanted product to harden and dispose with trash or use an approved household hazardous waste facility.
Detailing Images
Substrates preparation
A. All surface must be clean and dry, degrease and wash off any contaminates that could impair adhesion.
B.Certain plastic may require specific surface treatment to obtain optimum adhesion. Such as the polypropylene, which should need chemical corrosion or plasma treatments?
How to apply
A. Apply a bead of neutral sealant to one of the prepared surface, and then quickly cover with the other substrate to be bonded.
B. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. The surface is easily tooled with a spatula.
Why choose us:
1. Over 13 years manufacturing experience;
2. 11 years golden supplier on .com;
3. Exporting experience in over 80 countries;
4. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;
5. On time delivery, professional R&D team & satisfied sales service;
6. Customized product available.
Contact Us at Any Time
