Home
>
products
>
Waterproof Silicone Sealant
>
|
| Place of Origin | Guangdong,China |
| Brand Name | PLYFIT |
| Certification | SGS, REACH |
| Model Number | A0301 |
ODM Non Corrosive Silicone Sealant Window Installation Clear Silicone Adhesive
Quick curingnon corrosive silicone sealant window installation clear silicone adhesive
Art No. A0301
Products details
1. Fast curing
2. Water/rain resistant
3. Anti-fungal/mould
4. both Interior and exterior use
Technical specification
| Brand | PLYFIT |
| Color | Clear/Grey/black/White |
| Volume | 310ml |
| container type | cartridge |
| packing | 24pcs/carton |
| N.W: | 280g |
MATERIAL SAFETY DATA SHEET
Section 1: Product & Company Identification
Product Name: SILICONE SEALANT
Product Number: A0301
Manufactured by: Plyfit Industries China, Inc.
Section 2: Composition / Information on Ingredients
Component CAS ACGIH OSHA OTHER %
NUMBER TLV PEL LIMITS
Silica 7631-86-9 NE NE NE 12-15
Methyltriacetoxysilane 4253-34-3 NE NE 10ppm 8 -12
Ethyltriacetoxysilane 17689-77-9 NE NE 10ppm 9-13
Nitrogen 7727-37-9 NE NE NE 2-5
Dimethyl siloxane,
Hydroxy-Terminated 70131-67-8 NE NE NE 45-65
Polydimethylsiloxane 63148-62-9 NE NE NE 7-12
Section 3: Hazards Identification
|
Emergency Overview Odor: Acetic acid odor Warning: Contents under Pressure, Uncured product may irritate eyes |
Potential Health Effects:
Inhalation: Dizziness, nose and throat irritation.
Eyes: Irritation, moderate corneal injury.
Skin: NA
Ingestion: NA
Carcinogenicity: OSHA: No IARC: No NTP: No
Chronic Overexposure: None know
Medical Conditions Aggravated by Exposure: None know
-------------------------------------------------------------------------------
Section 4: First Aid Measures
Inhalation: Remove to fresh air. Give artificial respiration if necessary.
Eyes: Flush with large amounts of water for 15 minutes.
Skin: Remove contaminated clothing and wash area with soap and water.
Ingestion: Call a physician. Do not induce vomiting.
Section 5: Fire-Fighting Measures
Flashpoint: NA Method: NA LEL: ND UEL: ND
Extinguishing Media: Water fog, dry chemical and foam
Hazardous Combustion Products: Acetic acid fumes, CO2, SiO2
Fire-fighting Instructions: Remove containers from fire area if possible. Use
Self-contained breathing apparatus for fire
Fighting. Aerosol cans may explode if heated above
120℉.
NEPA: Health: 1 Flammability: 1 Reactivity: 0
HMIS: Health: 1 Flammability: 1 Reactivity: 0 PPE: B
Section 6: Accidental Release Measures
Spill/Leak Procedures: Usually not a problem with aerosols. Area should be ventilated. Absorbent should be used to pick up excess material.
Section 7: Handling and Storage
Handling Procedures: Store in a cool, dry area. Aerosol cans must be maintained below 120℉ to prevent cans from exploding.
Aerosol Level: 1
Section 8: Exposure Controls / Personal Protection
Engineering Controls: Adequate to prevent accumulation of vapors. Use mechanical means if necessary to maintain levels below the exposure limits. If working in a confined space, follow applicable OSHA regulations.
Respiratory: Use NIOSH/MSHA compliant respirators or self-contained breathing apparatus above exposure limits. Follow OSHA regulations 29 CFR 1910.134.
Protective Clothing/Equipment: Wear chemically protective gloves and safety glasses. Use a splash apron and boots if splashing occurs.
Section 9: Physical & Chemical Properties
Physical State: Paste Appearance & Odor: clear, white, black, gray
Paste, acetic acid odor
Specific Gravity: 0.97~1.03@25℃ Boiling Point: ND
Freezing Point: ND Vapor Pressure: NA
Evaporation Rate: <1 Vapor Density(air=1) >air
PH: NA Solubility: None in Water
Volatile Organic Compounds %: ND g/L: ND lbs./gal: ND
Section 10: Stability and Reactivity
Stability: Stable
Chemical Incompatibilities: Strong oxidizers.
Materials to Avoid: Strong oxidizers. Water causes curing.
Hazardous Decomposition Products: None
Section 11: Toxicological Information
Long-term toxicological studies have not been conducted for this product. See section 3 of this MSDS for acute symptoms of overexposure and carcinogenicity information.
Section 12: Ecological Information
Ecotoxicity: No data available.
Environmental Fate: No data available for biodegradation
Section 13: Transportation Information
Shipping Name: Consumer Commodity
Hazard Class: ORM-D UN Number: NA Packing Group: NA
Label: NA Placard: NA Special Provisions: NA
Section 14: Disposal Considerations
Disposal: This material if discarded may be hazardous waste, contact your local or state environmental agency for specific rules. Do not dump into sewers, on the ground or into any body of water.
Section 15: Regulatory Information
TSCA: All components are either listed under TSCA or are exempt.
CERCLA/Superfund(RQ): NA
Extremely Hazardous Substances: No
Packing Details
| ART NO. | CONTENT | CAN MATERIALS | CAN SIZE | CARTON SIZE | PACKING | 20’GP |
| A0301 | 300ml/pc | Tinplate | 48x220mm | 310x10x240mm | 12pcs/ctn | 20008ctns/48000pcs |
Shelf Life: 12 months
Caution:
Detailing Images
Substrates preparation
A. All surface must be clean and dry, degrease and wash off any contaminates that could impair adhesion.
B.Certain plastic may require specific surface treatment to obtain optimum adhesion. Such as the polypropylene, which should need chemical corrosion or plasma treatments?
How to apply
A. Apply a bead of neutral sealant to one of the prepared surface, and then quickly cover with the other substrate to be bonded.
B. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. The surface is easily tooled with a spatula.
Why choose us:
1. Over 13 years manufacturing experience;
2. 11 years golden supplier on .com;
3. Exporting experience in over 80 countries;
4. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;
5. On time delivery, professional R&D team & satisfied sales service;
6. Customized product available.
Contact Us at Any Time
